Working Principle
============
The Evaporator is divided into two cubicles the Inner Cubicle and the Outer Cubicle. Chlorine liquid is transferred directly from the source to the inner cubicle by container pressure. The Inner Cubicle is immersed in a temperature controlled Steam bath, which increases the temperature of chlorine causing it to boil and vaporize. Chlorine liquid enters the Inner Cubicle and maintains the required level necessary to meet the vaporization rate for gas demand. Automatically, a change in gas demand will cause the chlorine liquid level to adjust. The gas thus released is superheated as it passes through series of baffles while leaving the cubicle. Generally a superheated gas is required to prevent reliquification of chlorine in the process lines.
Installation
=======
The Evaporator should be located close to the source of chlorine. The length of the chlorine gas and liquid pipelines should be as short as possible. All the safety equipments should be handy. The plant should have provisions for exhausting chlorine gas, if a leak develops. Ideally a chlorine gas leak absorption system can be provided. It is recommended to fix a lifting device above the Evaporator to remove the inner cubicle. Consistent supply of saturated steam at recommended pressure, temperature and flow rate should be provided for reliable performance of the steam heated Evaporator.
Safety Features
===========
This Evaporator is designed to self adjust the liquid chlorine level thereby preventing the build up of excessive pressure. An automatic or manual Shut-Off Valve and Pressure Relief Valve, Cathodic Protection, Steam Valve, Condensate Trap, Drain Valve, Pressure Gauge and Temperature Gauge is also included for safe operation.
This Evaporator is designed for reliability, safety and very little maintenance. This Evaporator can be made fully automatic or partially automatic depending upon the level of automation and sophistication required by the Client...
============
The Evaporator is divided into two cubicles the Inner Cubicle and the Outer Cubicle. Chlorine liquid is transferred directly from the source to the inner cubicle by container pressure. The Inner Cubicle is immersed in a temperature controlled Steam bath, which increases the temperature of chlorine causing it to boil and vaporize. Chlorine liquid enters the Inner Cubicle and maintains the required level necessary to meet the vaporization rate for gas demand. Automatically, a change in gas demand will cause the chlorine liquid level to adjust. The gas thus released is superheated as it passes through series of baffles while leaving the cubicle. Generally a superheated gas is required to prevent reliquification of chlorine in the process lines.
Installation
=======
The Evaporator should be located close to the source of chlorine. The length of the chlorine gas and liquid pipelines should be as short as possible. All the safety equipments should be handy. The plant should have provisions for exhausting chlorine gas, if a leak develops. Ideally a chlorine gas leak absorption system can be provided. It is recommended to fix a lifting device above the Evaporator to remove the inner cubicle. Consistent supply of saturated steam at recommended pressure, temperature and flow rate should be provided for reliable performance of the steam heated Evaporator.
Safety Features
===========
This Evaporator is designed to self adjust the liquid chlorine level thereby preventing the build up of excessive pressure. An automatic or manual Shut-Off Valve and Pressure Relief Valve, Cathodic Protection, Steam Valve, Condensate Trap, Drain Valve, Pressure Gauge and Temperature Gauge is also included for safe operation.
This Evaporator is designed for reliability, safety and very little maintenance. This Evaporator can be made fully automatic or partially automatic depending upon the level of automation and sophistication required by the Client...
